LED lights are now common lamps, so people will prefer […]
LED lights are now common lamps, so people will prefer LED lights, whether it is a household lighting, a car, or outdoor lighting, you can see it, so let 100w Led Flood light manufacturers share with you the top ten LED lights Advantages.
1. The lamp body is very small
LED lights are small, very fine LED chips are packaged in transparent epoxy, so it is very small, very lightweight, saving a lot of materials and space in production and application.
2. Very low energy consumption
The working voltage of the LED lamp is generally only 2~3.6V, and the working current is only 0.02~0.03A. That is to say: it consumes no more than 0.1W, and the consumed electric energy is reduced by more than 90% compared with the incandescent lamp of the same luminous efficiency. The lamp is reduced by more than 70%. Therefore, only LED is a true energy-saving light source!
3. Sturdy and durable
The LED wafer is completely encapsulated in epoxy. The small epoxy resin particles are extremely difficult to break, and the entire lamp body has no loose parts; the inner wafer is extremely difficult to break, and there is a little thermal effect, which may volatilize and melt. These characteristics make the LED difficult to damage. Compared with ordinary light bulbs, fluorescent lamps and LEDs can be said to be solid and sturdy, and they are numerous and durable.
4. The LED lamp has a long service life
At the right current and voltage, the life of the LED lamp can reach 100,000 hours, which means that the product life is theoretically more than 10 years, which has a longer service life than other types of lamps.
5. Safe low voltage
The LED lamp uses a low-voltage DC power supply (which can rectify AC power to DC power), and the power supply voltage is between 6 and 24V, which varies depending on the product. In short, it uses a DC power supply that is safer than a high-voltage power supply, making it ideal for home and public use.
6. Wide range of applications
Due to its small size, each unit LED chip is 3~5mm square or round, so it is more suitable for the preparation of devices with the complicated modeling process. For example, the manufacture of soft, flexible tubes, strips, and shaped lights is currently only suitable for LEDs.
7. More colorful
In the past, the color of the lamps on the market was very simple. To achieve the purpose of color, one was to paint or cover the colored surface on the surface of the lamp, and the other was to charge the lamp with inert gas, so the richness of color was limited. LED is digital control, the light-emitting chip can now emit a variety of colors, including red, green, blue three-color, it is with this three-color, through the system control, you can restore the colorful world of the world.
8. Less heat dissipation
LED is a more advanced cold light source. It does not radiate a lot of infrared rays and ultraviolet rays like incandescent lamps and fluorescent lamps. It is especially suitable for the illumination of valuables such as cultural relics, jewelry, and high-end cosmetics. There is almost no current thermal effect like an incandescent lamp, and it is not subject to thermal expansion and contraction and frothing. It will not make the bulb yellow, will not accelerate the aging of the luminaire, and will not constitute a greenhouse effect on the surrounding environment.
9. Less environmental pollution
The protection of LEDs for the environment is mainly manifested in three aspects:
First, there is no hazard of metallic mercury. LED lamps do not use high-hazard mercury like fluorescent lamps, and there is no public hazard such as mercury ions or phosphors that may leak during or after the bulb manufacturing process.
Secondly, the epoxy resin for manufacturing LED is an organic polymer compound. It has good physical and chemical properties after curing. It has high bonding strength to wafers and metals, is hard and flexible, stable to salt and alkali and most solvents, and is not easily damaged. It can be recycled and reused even after damage or aging, and will not pollute the environment.
Third, the particle layout of LED lamps and display screens, the generated light is generally scattered, and rarely produces light pollution.
10. More cost savings
Compared to incandescent lamps, fluorescent lamps and LED lamps are priced higher. However, due to the extremely low energy consumption of LEDs, in the long run, a large amount of electricity can be saved, and the investment in lamp replacement can be saved so that the comprehensive use cost is more cost-effective.
