With the acceleration of urbanization, more and more […]
With the acceleration of urbanization, more and more buildings and residential areas have been developed. To reflect the higher and more beautiful scenery of residential areas, street lamps with different shapes have been widely used in various residential areas. Although most street lamps in the market currently use led light sources, which have the advantages of long service life, we still need to clean and maintain them to show more artistic value of street lamps.
I. cleaning of 100w outdoor slim led floodlight
1.100w outdoor slim led floodlights is installed beside the road to the residential area, which will generally to drop more dust. When cleaning, wipe it with a wet cloth. Keep the movement away the same direction, do not rub it back and forth, and the strength should be moderate.
2.100w outdoor slim led floodlight will also be grayed out, so we need to clean the street lamp light source. When cleaning the light source, turn off the light first. When wiping, we can take off the bulb separately to wipe. If cleaning is done directly on the street lamp, do not rotate the bulb clockwise to prevent the lamp cap from being screwed too tightly and peeling off.
II. Maintenance of 100w outdoor slim led floodlight
Don't drive frequently at ordinary times.
Turning off street lamps will greatly reduce their service life, so when using street lamps, the switch to road lamps should be minimized.
2. When the lampshade of the street lamp is tilted during use or cleaning, it should be corrected conveniently to keep the appearance.
3. When adjusting the lampshade of the street lamp, pay attention to avoid the reflection of shadow when the trigeminal brace for the lamp lights up;
4. According to the light source parameters provided by the sign, replace the aging lamp tube in time. If it is found that both ends of the lamp tube are red, the lamp tube is black or has dark shadow, and the lamp tube cannot jump, replace the lamp tube in time to prevent unsafe phenomena such as ballast burning.
These are the cleaning and maintenance methods for street lamps in residential areas. We must do more cleaning and maintenance at ordinary times, which will greatly to increase the service life and beauty of street lamps.
