In the development of high-performance floodlights, v […]
In the development of high-performance floodlights, various natural factors have been fully considered. These devices are very capable of dealing with these natural factors. In this way, these devices can better display their effects during use. The ability to deal with natural factors allows us to use these devices without hesitation, which allows us to use our devices to achieve very good results.
Project-light lamp manufacturers consume very little because LEDs are used as light sources. Even if you use a large number of high-performance LED wall washers, the energy consumption will not be very heavy. Also, LED light sources to have a longer projection distance and higher resolution than ordinary light sources. Therefore, the powerful LED wall washer with energy-saving and high-efficiency functions of the floodlight manufacturer has completely replaced other wall washer products.
The floodlight can be installed and used individually, or multiple lamps can be combined and installed on a pole above 20m to form a high pole lighting device. In addition to the beautiful appearance, centralized maintenance, and reduced lamp poles and floor space, this device has the big advantage of strong lighting function. When the light is projected from a high place, the spatial brightness of the environment is high, and the light coverage is large, giving people a feeling similar to daylight, so it has high lighting quality and visual effects.
The choice of LED flood light naturally depends on its appearance. If the appearance is not good enough, it is difficult to guarantee the invisible places inside. If the shell is made of die-cast aluminum, the shell should be sprayed with anti-ultraviolet material, which is corrosion-resistant and will not fade. Also, the wavelengths emitted by the lights are consistent, and the colors are pure to achieve better lighting and better lighting effects. The headlight manufacturer’s lamp uses a two-layer protection device with a waterproof design. All cable components are covered with a special protective adhesive. Even if the switch box is not tight, the circuit can be protected. The high-pressure water gun can be used for cleaning and flushing.