Today's LED floodlights are common, some will be easy t […]
Today's LED floodlights are common, some will be easy to load and unload, but some loading and unloading are troublesome, so please don't go to the installation without any complete grasp, because LED floodlights will be caused by various conditions. The following Outdoor Flood light manufacturers will share the correct installation process and installation considerations:
First, the installation process of LED floodlights:
1, install the guardrail, punch holes in the wall, arduous according to the actual requirements, generally within 3 cm.
2, do anti-static measures, such as the workbench to be grounded, workers wear the corresponding electrostatic clothing, anti-static measures, because different grades of LED floodlights of different quality, the anti-static ability is different.
3, installation attention to sealing, poor sealing, diameter affects the service life of LED floodlights.
4, LED floodlight wiring is preferably no more than 25 cm, the transformer power can be lengthened accordingly, otherwise, it will affect the brightness.
Second, LED floodlight installation notes:
1, try to use the series LED form because the LED floodlight voltage difference is special. The peak current of a common LED is maintained at 80 mA, and the reverse voltage is at or above 6 V. In LED applications, attention should be paid to the peak voltage and current at which the circuit is designed.
2, the use of voltage below 25 watts when soldering, soldering iron only control 哎 300 degrees Celsius below the exposed SMD LED at high temperature, do not squeeze its epoxy part, or wipe with a sharp hard object, because LED lamps are very Fragile, extremely vulnerable, welding time is 3 seconds.