The Impact Of Typhoon Rain On 100w LED Flood Light?

Update:28-12-2020
Summary:

  We often see some trees broken or even overturned by […]

  We often see some trees broken or even overturned by the typhoon after a typhoon, which has a serious impact on people’s personal safety and traffic. Similarly, the LED street lights and 100w LED floodlights installed on both sides of the road are also facing the typhoon. There is a risk of breaking, and the damage to people or vehicles from the street lamp is more direct and fatal because of the breaking. Therefore, the 100w LED flood light and how the LED street lamp resists the typhoon has become an important matter.

  So how can outdoor lighting street lights such as LED street lights and 100w LED flood light to resist typhoons? Relatively speaking, the higher the height, the greater the force. In the face of strong wind, a 10-meter street lamp is often more likely to be broken than a 5-meter street lamp. This is not to say that we should avoid installing tall street lights. One reason for this is related to the product itself.

  For 100w LED flood light, resistance to typhoon should be done from three aspects: First, the foundation should be buried deeper and installed with buried cages. This is to strengthen the connection between street lights and the ground to prevent strong wind. The street lamp is pulled up or blown down. Second, avoid cutting corners and thickening the material of the light pole. In order to save the material of the light pole, the possible risk is that the light pole is broken halfway, because the light pole is made too thin and the height of the light pole is high. It is easy to be broken when it is not in use. The 100w LED flood light pole should be able to withstand at least a level 12 typhoon, and most areas in the north should be able to withstand a level 10 gale. Third, it is very important to reinforce the bracket of the street lamp energy board, because it may be blown off directly because of the lack of force, so it must be made of high hardness materials. Then the prevention of LED street lights only needs to do the first two steps of the first three steps.

0
Views: 16